2d To 3d Picture Converter

Posted on

When you are walking down the street and you see an amazing squirrel crossing your path, have you ever thought to yourself “ how can I 3D Print it ”? Well, I have some good news for you; if you have a picture of it then you can turn it into a 3D model and 3D print it! From 1 to 100 hundred pictures, several effective solutions are available to help you turn a picture into a 3D model. The results of your model depend on the number and quality of the photos you take; the more photos and the higher the resolution the more detailed your 3D model will be.

Get expert answers to your questions in 3D-Imaging and more on ResearchGate, the professional network for scientists.

2d To 3d Converter

You don’t need to be a professional 3D artist, but with an ounce of 3D skill and enough time, everyone can achieve a good 3D character and print it. In this article, you will find an overview of different solutions to answer your question “how can I convert my picture into a 3D model?”. With any of these solutions, you have to keep in mind that results are highly dependent on the source footage. That’s why there is no one-fit-for-all solution.

Based on our experience and the thousands of 3D prints that we have done we selected the best solutions depending on your expectation and give you some practical advice to create the most efficient shooting. From the shooting to the final choice of the 3D printing materials, you can do all the process on your own. Don’t be scared, if you really don’t know how to use a 3D modeling software, you can get a little help from a designer to get a 3D printable file. You’ll see that 3D printers can give life to your best images. You can create any avatar or model that you want with the 3D printing technology, you can also create a CAD model with images from video games. Everything is possible. We split the solutions on the number of images that you have already taken to generate your 3D file.

2d To 3d Picture Conversion

Picture

How can you turn one picture into a 3D model? Did you know that you can create a 3D model even with a single picture? Don’t get too excited – you should keep in mind that the possibilities and the details allowed would be more limited. For example, you cannot expect to create a perfect 360° file of your pet or your home based on 1 picture. To obtain the desired shape with a printing process, it is better to have a lot of pictures to get an impressive result. Maybe it will be possible to print a perfect CAD model thanks to only one picture in the future of 3D printing, but it’s not possible yet.

But still, if you only have this option you can create an interesting 3D printed object with the additive manufacturing technology that we know today. Use the Extrude tool A picture is a 2D file, meaning that you will only be able to play with two axes to use it in your 3D model. The extrude tool will help you to create a third axis to create new geometry from a selected component. This tool will help you to give volume to your 2D model based on a specific algorithm (most common is converting your image in levels of grey and calculates the height based on the intensity of grey). It’s a pretty common tool that you can find on CAD software. If you’re not owning a graphic software you can have a look one of these free amazing 3D software: SketchUp, Blender or Meshmixer.

This free online software is a game-changer in the creation of a 3D model based on a single picture. With only one picture it helps you to create a simple digital model online that looks closer to the kind of result that you get with a scan or photogrammetry. What’s the trick? Well, if your 2D model can be symmetrically replicated you can get a surprisingly lookalike 3D model. However, if you need to create an asymmetrical model with a lot of details you will probably need to use another software with more pictures. As an example, you can watch this demonstrative video. How can you convert 2-3 pictures into a 3D model Many times people are contacting us for a solution based on 10 or 20 pictures.

For example, when you’re looking to create an avatar of – let’s say – your grandpa, you start asking around to get pictures, try to find a good portrait of him, another picture of him sitting in the garden, the third one playing with your kids etc When you think you have grabbed enough material, you’re looking for an automatic solution to build a 3D model based on these various pictures that have been taken at different time, with different devices etc. Unfortunately, there is none. Because a very special secret-sauce is needed in this case and it’s imagination. You have to mentally organize the pictures and sculpt your model based on the measure and details that you can grab from the pictures. It takes a lot of time to create a model from photos like this. So the only way to get to an optimal result is to convert a lot of pictures to make a very precise digital design. Then, you’ll be able to print an interesting model.

To summarize, you have 3 solutions with few pictures. you can still use the solutions described for 1 photo.

you can launch yourself in 3D modeling software (such as Zbrush or ). you can ask a 3D designer to help you modeling your 3d file.

Indeed, with more perspective thanks to the different pictures, you or he would be able to create a more detailed and accurate 3D model. If you need more information to find a 3D designer or this process, please feel free How can you generate a 3D model from multiple images Even if 3D printing enables you to create 3D objects with complex shapes you first have to create a detailed model to get an optimized result. In this part, we are giving you few tips to optimize your pictures in order to create the best 3D model. To do so, the best way for you is to use photogrammetry. This technique implies a process of collecting a series of points in space from a series photographs.

First, you snap a series of photos of the object from every angle that you can, once you have those photos you upload them into a photogrammetry software and you can generate a file to 3D print it. Tips to take the best pictures possible to get a high-quality rendering of your 3D model. Choose the good material for the best result. A digital camera: of course your old camera won’t make the trick, as you need to have digital files to upload on your computer. Your smartphone’s camera can be a good start but you’ll obviously get a more detailed result with a digital as the pixels resolution will be three times more important and the setting more customizable. We strongly recommend using this type of camera since you need to to make the most of the light and the outline of your subject. The best settings are a low ISO to diminish the most possible the noise.

The main advantage of it is that it will help you to get a small aperture with a reduced depth of field. This would allow you to increase the sharpness of the subject outline, making it less confusing for the software. If you are considering to take a subject in movement, be aware that the setup could be far more complicated. You will need many digital cameras as below on the picture (between 50 and 100) with a simultaneous triggering mechanism. A lighting device: Even if you can settle your camera settings to improve the light sensitivity, an additional lighting will be key to improving your shooting. Adding a light will help you to earn at the same time a good light sensitivity and lower the noise.

Indeed, your ISO could be lower and you will gain in speed and reduce the grain. Whether you use natural or artificial light, what is key is to avoid the most as possible shadows that would blur the outline of the subject. A Tripod: or any support allowing you to stabilize the subject and your camera. The pictures will be less blurred and more consistent. It will provide more high-detailed and flat pictures. Follow these ten commandments of an optimal shooting to create your 3D file.

Try to place your object in a way it is raised and you can easily turn around to take pictures from all the angles. Shoot various loops and change your angle every time to be sure to cover the surface of your object from the top to the bottom and from the left to the right. Take at least 30-40 photos to get a detailed model. In order to make the process on your software easier put some newspaper or sticky notes on the surface in contact with your object, it will help to distinguish it from your object. Limit the variation of light, moves and focus between your pictures.

2d To 3d Photo

Make sure that the exposition will be enough to get the precise shape of your object. To make the most of your camera’s pixel you can try to do your shooting in to get the sharpest pictures possible. Use a lens with a low deformation between 30-60 mm. Have a small aperture between 8 and 16. The smallest ISO possible between 100 – 200 Selection of approved photogrammetry software to create your 3D file Once you have this series of pictures you can upload them on specialized photogrammetry software such as the following ones: 123D catch is an Autodesk software which allows you easily to create a 3D model from your pictures with your smartphone or your computer. The application is free and you can download it on.

The of 123D catch is full of tutorials that will help you to master easily the software from your first try and will give you precise tips to improve your set of pictures. Check also the tutorial that we have developed in “Autodesk Memento is an end-to-end solution for converting any captured reality input (photos or scans) into high definition 3D meshes that can be cleaned up, fixed, and optimized for the Web, mobile or 3D printing / fabbing.” Compares to 123D catch, Memento produces higher fidelity result as you can upload more pictures to create your 3D model. Photoscan is a computer software that is also a good alternative. It offers a free license for individuals or a professional license costing $179. There are some technical requirements on your computer to make it work properly (for example RAM more than 256 GB). But the results can be impressive when you choose to upload a lot of data.

2d to 3d converter

For example, this software was used to create an impressive 3D model of a whole university campus based on 5000 pictures. It is less accessible than Autodesk’s software and will be more targeted for experimented users. In the same way that Photoscan, Acute 3D is a more complex and professional oriented photogrammetry software. Recently acquired by Bentley system, this software is at the edge of the technology and offers astonishing results.

What about turning an object into a 3D model? The best method to turn an object into a 3D model is 3D scanning, to capture the shape of your item. We are pretty sure that you don’t have a 3D scanner at home, but did you know that you could?

3D scanning is an easy method to turn an object into a CAD model. Thanks to CT scanning, you could also, and you also could 3D print! Once you have a 3D file, what should you do? You have three final steps. First, you need to finish and optimize your 3D file in another software than the ones described above. It happens often that your 3D file can be non-printable since it’s very difficult to create a solid mesh based on a set of pictures (i.e.

Some 3D software are offering efficient tools for creating proper files and we have reviewed them in a. You’ll be able to work on the resolution and size of your file, by creating a high or low poly mesh. Then, you have to pick a format for your file. 3DS, OBJ, C4D, DAE, STL, you don’t know which one to choose? Check out this page about the, you’ll find all the details about the supported file formats At last, and the easiest part: you just have to! There are a lot of possibilities to 3D print models because various 3D printing materials are available. You have to choose the 3D printing material that you want for your CAD model, it will determine the additive process.

Usually, we recommend using the full color sandstone material in order to get a colorful and likely result. As you can see, with the 3D printing technology that we have now, it is not that difficult to turn photos into 3D models.

You can do it on your own or with a little help, and the good news is that you don’t need to have a 3D scanner or 3D printers at home. Even if additive manufacturing is very useful and efficient for rapid prototyping, or even to work on industrial designs thanks to impressive technologies allowing to create a large variety of projects from medical devices to kitchen equipment, office equipment or architectural exteriors. Witch technologies such as, or, you can work on anything, or just experiment these printing processes it for fun. Do you feel ready to turn your pictures into 3D file and become a real 3D artist? Well, we hope you’ll be tempted to give photogrammetry a try and give life to your pictures with our multicolor 3D printing material!

Thanks to this little guide you’ll be able to create a 3D character without using 3D scanning. We’ll be delighted if you share with us your project on twitter by tagging us @sculpteo on Twitter or on Facebook!

We are always excited to see what you can achieve with 3D printing technologies. It’s the occasion to show us how you can get impressive results by turning your photos into 3D models!

. Under Files in the Project panel, right-click the name of the image file, and then click Insert. The image file is added as an Image object that you can resize and modify on the artboard.

In the Toolbox, click Selection, and then select the image that you just inserted. On the Tools menu, click Make Image 3D. The Image object is converted to a Viewport3D object. Within the Viewport3D object are containers for the cameras and lights. A perspective camera, an ambient light, and a directional light are created by default. For instructions about how to manipulate the 3D object, see the How to topics listed under 3D.